Dallas County, TX — August 14, 2025, Martin Dewitt was injured due to a car accident at approximately 9:00 p.m. along Belt Line Road.
According to authorities, 62-year-old Martin Dewitt was traveling in a westbound Toyota Tacoma pickup truck on Belt Line Road at the Meandering Way intersection when the accident took place.
The intersection is controlled by a traffic signal. Officials state that, for reasons yet to be confirmed, the pickup truck entered the intersection at an apparently unsafe time, failing to heed the light indicated by the signal. A collision consequently occurred between the pickup truck and a southbound Chevrolet Traverse. The Tacoma overturned over the course of the accident, reports state.
Dewitt reportedly sustained serious injuries due to the wreck. It does not appear that anyone else was hurt. Additional details pertaining to this incident are not available at this point in time. The investigation is currently ongoing.
Commentary by Attorney Michael Grossman
Any time a vehicle flips over during a collision, especially at a signal-controlled intersection, it’s a strong signal that something went seriously wrong—far beyond a simple lapse in judgment. When someone is badly hurt, it’s not enough to say a light was missed. The bigger issue is: why did that happen, and what else might have contributed?
1. Did the authorities thoroughly investigate the crash?
Collisions at intersections can be deceptively complex. A basic police report might capture who had the green light, but a deeper investigation should go well beyond that. Was the pickup speeding as it approached the intersection? Did investigators look at sight lines, brake marks, or attempt any kind of crash reconstruction? The question also hangs on whether the officers had the resources and training to fully analyze how the pickup ended up overturned. Some departments dig deep; others check boxes and move on. That variability can mean the difference between clarity and confusion.
2. Has anyone looked into the possibility that a vehicle defect caused the crash?
When a vehicle rolls after a collision—especially one like a pickup truck—it’s worth asking whether something in the truck’s mechanics or systems played a role. Could the brakes have failed? Was the steering unresponsive or delayed? Even electronic signal timing within the truck’s control system could factor into how it reacted in those final seconds. And if the impact force wasn’t especially extreme, yet the vehicle still flipped, that raises the possibility of a stability issue. The only way to know is through a close, mechanical inspection of the vehicle—if that’s even been done.
3. Has all the electronic data relating to the crash been collected?
Both vehicles involved—especially the newer SUV—are likely to contain valuable onboard data. That means there’s potential to know exactly how fast the Tacoma was going, whether brakes were applied, and even if the driver had time to react. Phone data could also tell us whether distraction might have played a role. Camera footage from traffic systems in that area might also help piece together who entered the intersection when. These are the kinds of details that move an investigation from guesswork to answers.
Too many intersection crashes are chalked up to a “bad call” by one driver. But when a vehicle rolls and someone ends up in the hospital, the goal shouldn’t be to assign blame quickly—it should be to find out what really happened.
Key Takeaways:
- Intersections require deeper crash analysis, especially when a vehicle flips.
- A vehicle defect or stability issue can’t be ruled out just because it isn’t obvious.
- Onboard and phone data can provide a minute-by-minute breakdown of the crash.
call us 
Email Us 
Text us