Ahwatukee, AZ — October 15, 2025, two people were injured due to a crane truck accident sometime in the morning along Interstate Highway 10.
According to authorities, two people were traveling in a crane truck along I-10 in the vicinity of Ray Road when the accident took place.
Officials indicate that, for as yet unknown reasons, the crane truck was involved in a single-vehicle collision in which it apparently struck the center median barrier and overturned. Both occupants of the truck reportedly sustained injuries over the course of the accident. They were each transported to local medical facilities by EMS in order to receive necessary treatment. Additional details pertaining to this incident—including the identities of the victims—are not available at this point in time. The investigation is currently ongoing.
Commentary by Attorney Michael Grossman
When a crane truck strikes a median and overturns, the most important question isn’t just what happened in that moment—it’s what conditions led to the driver losing control in the first place. Crane trucks are large, top-heavy vehicles with complex handling characteristics, and a rollover usually points to a failure in either vehicle dynamics, driver input, or both.
At this stage, it’s not clear whether the driver swerved to avoid something, experienced a mechanical failure, or simply lost control due to excessive speed or an unstable load. That’s why a thorough investigation should begin with engine control module (ECM) data, which can show speed, braking, and steering inputs in the seconds before impact. Dash cam footage and any available in-cab video can also shed light on road conditions and what the driver was reacting to—if anything.
One factor that deserves special attention is load configuration. Crane trucks, especially when carrying heavy gear or attachments, must be properly balanced to maintain stability during turns, braking, and lane changes. An unbalanced load or improperly secured equipment can shift weight suddenly and make the vehicle almost impossible to control. Investigators should inspect how the load was positioned and whether it met safety standards for travel.
This crash also raises questions about driver training and experience. Was the operator qualified to handle a crane truck on a busy interstate? Did the company provide route-specific guidance or safety protocols for freeway driving with this type of equipment? In cases I’ve worked, companies have been held responsible when they put undertrained drivers behind the wheel of specialized commercial vehicles without adequate preparation.
Finally, the condition of the vehicle itself can’t be overlooked. Steering, brakes, and suspension systems in heavy equipment trucks take a beating and require regular, documented maintenance. If any component failed at a critical moment, that could shift liability from the driver to the company that maintained—or neglected to maintain—the truck.
Key Takeaways:
- The cause of the crash remains unclear, but ECM data and dash cam footage are essential for reconstructing the events.
- Load balance and cargo securement are critical factors in crane truck stability and should be closely reviewed.
- The driver’s training and qualifications may play a key role in assessing fault, especially with specialty equipment.
- Vehicle condition—including brakes, steering, and suspension—must be evaluated as potential contributors.
- Company oversight of routing, safety protocols, and driver preparation may carry as much legal weight as the crash itself.
call us 
Email Us 
Text us